home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19970326-19970626 / 000201_news@newsmaster….columbia.edu _Thu May 15 17:03:55 1997.msg < prev    next >
Internet Message Format  |  2020-01-01  |  4KB

  1. Return-Path: <news@newsmaster.cc.columbia.edu>
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
  3.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id RAA05746
  4.     for <kermit.misc@watsun.cc.columbia.edu>; Thu, 15 May 1997 17:03:55 -0400 (EDT)
  5. Received: (from news@localhost)
  6.     by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id RAA18972
  7.     for kermit.misc@watsun; Thu, 15 May 1997 17:03:55 -0400 (EDT)
  8. Path: news.columbia.edu!panix!news.mathworks.com!cam-news-hub1.bbnplanet.com!su-news-hub1.bbnplanet.com!news.bbnplanet.com!newsout1.alt.net!news1.alt.net!news.aros.net!news.cs.utah.edu!cc.usu.edu!jrd
  9. From: jrd@cc.usu.edu (Joe Doupnik)
  10. Newsgroups: comp.protocols.kermit.misc
  11. Subject: Re: [problem with Kermit 3.11]
  12. Message-ID: <1997May15.134740.98191@cc.usu.edu>
  13. Date: 15 May 97 13:47:40 MDT
  14. References: <01IITM8RJD9U9ICU55@cc.usu.edu>
  15. Organization: Utah State University
  16. Lines: 50
  17. Xref: news.columbia.edu comp.protocols.kermit.misc:7033
  18.  
  19. In article <01IITM8RJD9U9ICU55@cc.usu.edu>, Joe Doupnik <JRD@cc.usu.edu> writes:
  20. >>From: "Joel T. Augard" <jaugard@netins.net>
  21. >>Newsgroups: comp.protocols.kermit.misc
  22. >>Subject: problem with Kermit 3.11
  23. >>Date: Tue, 13 May 1997 11:18:07 -0500
  24. >>Organization: netINS, Inc.
  25. >>Lines: 20
  26. >>
  27. >>I'm using MS-DOS Kermit ver. 3.11.  I've got a workstation connected to
  28. >>a Novell 3.12 server.  The workstation has a boot disk that loads the
  29. >>DOSODI protocal and uses VLM to connect to the server.  After connection
  30. >>to the server is established and the workstation logs in the command 
  31. >>KERMIT SERVER is executed to put the workstation into server mode.  I
  32. >>have another workstation connected to the kermit workstation using the
  33. >>same version of kermit.
  34. >>
  35. >>The problem that i'm having is that I can't access the network drives on
  36. >>the kermit server.  When i issue a REMOTE DIR command from the other
  37. >>workstation I get an error message stating that device is unavailable. 
  38. >>I also get this error message anytime i issue a REMOTE command.  I can
  39. >>however issue REMOTE CD A:\ and then REMOTE DIR and i can get a
  40. >>directory of the floppy.  I can even send/receive files from the floppy,
  41. >>but i can't do anything to the novell network drive.  Is there a known
  42. >>incompatability between MS-DOS KERMIt and novell's vlm's?  Any help that
  43. >>can be offered would be appreciated.
  44. >>
  45. >>Joel T. Augard
  46. >>Aesculapian Concepts
  47. > ---------
  48. > Joel,
  49. >     This isn't an MS-DOS Kermit problem at all, but rather the way
  50. > you have the workstation and its NW login script and perhaps net.cfg
  51. > composed. MSK does not use IPX, so all IPX and above features are completely
  52. > independent of MSK. VLMs handle IPX work. To check things I recommend you look 
  53. > at drive mappings, by first bringing MSK out of server mode.
  54. >     Also, MSK v3.11 is very old indeed and I recommend you upgrade to
  55. > the current release, v3.14, or even the current open beta 3.15.
  56. >     Joe D.
  57. ---------
  58.     Adding to my own chatter after thinking about the situation again.
  59. MSK 3.11 supports Packet Drivers but not ODI drivers. Later versions (3.14
  60. is current, 3.15 is in beta) support both. This suggests maybe the workstation
  61. is setup to use a PD for TCP/IP but has no NetWare connectivity at that time.
  62. Should that be the case then again upgrading MSK will permit you to dispense
  63. with the Packet Driver (unless under Windows) and run straight over ODI.
  64.     Also, MSK 3.11 puts the screen rollback buffer in conventional
  65. memory (640KB stuff), and later versions can use expanded and (v3.15)
  66. extended as well. Screen rollback memory can get huge (at 4KB per screen)
  67. and if left in conventional memory there won't be space to do anything else.
  68.     Joe D.